Cherry Mead - Black Lapin Cherry and Sour Cherry

With the summer here and a wicked deal on Cherries at one of the local produce stores I figured what better time to work on some Cherry Wine. It didn't hurt that the wife is away at some silly scrapbooking retreat. It's 20 minutes away, how can they call it a retreat.... retreat from the wallet maybe.

Anyways, I popped a few percacet last night and went to work at pitting 17 pounds of Cherries. Yes, you heard right, 17 pounds. From there, I tossed the now seedless cherries into the freezer for the night. The theory being, the freezing of the fruit makes the juice or sugar molecules 'splode. I read it on that thar Internet... so it must be true.

Today I took them out of the freezer and tossed them, 4 pounds at a time, into my favorite little steam juice extractor. I can't say enough about this thing, clear juice with very little mess.

Since I only had just over 13 pounds of cherries after the removal of the pits, I didn't have quite the pre-requisite 8 litres I usually like to start with. Luckily, I had some frozen cherry juice I saved from last year. That combined with about 5 cups of sour cherry drippings from a different harvest last year made for a very sweet juice indeed. When I measured the SG (Prior to adding sugar) it was sitting at 1.060. Chit, that is sweeter than the previous batch of Rasberry Mead - Pulque. I added 2 teaspoons of citic acid, for good measure. So now I am ready to make the Cherry juice a little sweeter (maybe around 1.080)

Your Ad Here

So here is the recipe

Cherry Mead

1 litre Sour cherry Juice
7 litres Lapin or black cherry juice
2 Teaspoons Citric Acid
2 1/2 cups Honey
1 pack 1118 yeast
1/2 teaspoon energizer

Note: I did take out about 4 cups of sweetened cherry juice (Pre Yeast) to bring the level in the jar down. The reason being, with the last batch I did, the juice was too high and it ended up overflowing. Once the fermentation starts to stabilize, I plan on adding the juice back in.

Specific gravity 1.080 on the button

Inoculated at 10 PM on Friday August 6, 2010

Additional note regarding left over cherries.

When you consider the cost of Cherries and the amount of juice required for making Cherry Wine it may seem a little expensive. However, the cherries left over when de-juicing them with a Steam juice extractor are not gone. There is plenty of flavour left over in the cherries and they can be used for pies, jams or simply eaten on their own with a little cottage cheese or ice cream. I have 5 pounds of cherries left over from the original 13 pounds. Some will be frozen some will be canned and the rest eaten as is.

You can also use the left over cherries in breads and cakes. mmmmm yummy

Raspberry Mead Pulque

Yes, once again I am head butting with the trends. I picked a butt load of Raspberries the other day as one of the local farms had a great deal on U-pick Raspberries for 99 cents a pound. Soooo I spent a few hours picking followed by a few days in pain. The resulting bounty was 20 pounds of berries which I quickly made into juice via my favorite steam juice extractor which you will see an amazon ad for on the left. I honestly cannot say enough good things about this juice extractor. It is by far my best investment when it comes to making wine.

OK, enough with the promotion of someone elses product and onto the wine making. If you do decide to purchase one though, please help out this blog (AKA my wallet) and buy it through the link on this page. Now onto the recipe

Your Ad Here

The resulting juice from the steam extraction was about 8 litres or just over 2 US Gallons which is 2 Canadian Gallons... Eh!
In the past, I have watered down the juice to save money but this time I figured I would go as close to pure as possible, sure I would end up with less wine, but with any luck it will be a much better product.

As with most of my endevours, I first checked out what Jack had to say on the topic. In case you don't know, Jack Keller has become known as a sort of online wine Guru of sorts (Sorry Jack) He has given me advice on a few ocassions, I usually listen to what he has to say and go ahead and do what I want. Nothing against his advice, I'm just a stubborn Kraut.

So back to the recipe. Focus Heinz, focus. (I blame the heat wave in Vancouver)

So like I said, Pure juice very little water if any.

Due to the size of my primary, I removed some of the juice and ended up with 7.5 litres (or Liters in US Speak) The specific gravity pre any sugar was already at 1.030 so I did not need to add much unless I wanted to make hooch.

Raspberry Mead-Pulque

7 1/2 litres juice
1 tsp Citric acid

2 cups agave brought it up to 1.050

2 cups honey brought it up to 1.076 so I added
1 cup honey which resulted in a specific gravity of 1.083
2 cups water brought it back down to 1.081
1 tsp Energizer
1 Pack Lalvin K1-V1116 Yeast, Why.... Because


Added After Primary Fermentation:

3 Teaspoons Powdered Stevia

As an experiment, I added 1 tsp of stevia to flask brought spec gravity up by
.04. In a previous post on using Stevia to sweeten wine, I mentioned Stevia as a non-fermentable sugar. I wanted to see of the addition of Stevia pre-fermentation had an effect on the Specific gravity... well it does. So for those looking at using Stevia to sweeten their wine should add it after your final reading as it will give you a false potential alcohol level seeing as Stevia does not ferment and you will never be able to ferment to dry (per your hydrometer reading) You can see the Stevia post here

The specific gravity of the full batch ended up being 1.082 (keep in mind, a small amount of that was as a result of Stevia.

Just as a little clarification for those unfamiliar with Mead and Pulque. Mead is made with Honey instead of sugar and Pulque is made with Agave Nectar (The same stuff they use to make Tequila) In Mexico, the resluting wine is called Pulque, or Nectar of the Gods. Tequila is made by taking the Pulque and distilling it a number of times.

inocculated 8:17 PM Thursday July 8, 2010. Updates will follow as comments.

Cheers